Print

Preceram 100 

Cementitious mortar for joining 2 to 15 mm tiles

Description

PRECERAM 100 is a mortar with decorative purposes, formulated on the base of hydraulic binding agents, admixtures, special resins and inorganic pigments.

Once applied, PRECERAM 100 is highly workable and fills easily any type of distance between the tiles, not allowing the color to fade.

PRECERAM 100 conforms to CG2-W-Ar type, according to UNE-EN 13888.

Technical Data

• Type: Modified cementitious mortar with resins and admixtures.
• Aspect: Powder.
• Color: See color list.
• Density at fresh: ~ 2.0 kg/dm3.
• Pot life: 100 min.
• Setting time: Transit: 24 h.
• Use: 7 days.
• Fire reaction (EN 13501-1): A1.
• Thermal conductivity (EN 1745): 0.9 W/m K.
• Applicable thickness: 2 - 15 mm.

Features

• Easy to apply and clean.
• High workability.
• Homogeneous.
• Durable.
• Stable color.

Application procedure

Substrate preparation: The joints between the tiles should be uniformly cleaned after placing them.

Mixing: Mix approximately 7 to 10 liters of water per 25 kg bag of PRECERAM 100 to obtain a uniform mix. A mechanic mixer is recommended. After mixing, allow a waiting time of 5 min.

Application: PRECERAM 100 mortar should be applied using a rubber edged trowel, filling diagonally. Then, PRECERAM 100 is spread using a rubber trowel, eliminating the extra material by a sponge. In case of rough material, material without glazing or joint filling in walls, the mortar should be placed in plastic consistency using a rubber spatula or a trowel topped with a sponge. After the mortar has hardened, clean the edges of the joint from extra material, using a wet clean sponge.

PRECERAM 100 cannot be applied on hot surfaces, wet surfaces or at temperatures lower than 5ºC.

Tools cleaning: Tools and application equipment are washed with water immediately after use. If the product hardens, it can only be removed by mechanical means.

Recommended for

• Sealing of ceramics tiles joints.
• Sealing of any type (ceramic, stoneware, etc.) of tiles joints.
• Sealing of interior and exterior joints.
• Vertical and horizontal joints sealing.
• Joints filling in natural stone.
• Joints sealing in artificial stone of the type COPSAGUNIT H.
  

Special precautions

This product contains cement. Avoid its contact with the eyes, the skin or its inhalation. Use rubber gloves and protective goggles while applying it. Keep away from children's reach

Empty packaging must be disposed of in compliance with the local legal norms.

Consumption

Yield could be calculated following the following formulae:
(A + B) x C x D x 2 / (A x B)

where:
A: tile width in mm.
B: tile length in mm.
C: tile thickness in mm.
D: joint width in mm.

Example: tiles of 40x40cm, 11 mm thickness and a joint between tiles of 10mm:
(400 + 400) x 11 x 10 x 2 / (400 x 400) = 1,1 kg/m2.

Packaging

PRECERAM 100 is supplied in 5 and 20 kg bags in various colors (see list of colors).

Storage

PRECERAM 100 shelf life is 12 months if kept in a dry place, protected from the weather conditions.

Activities where this product appears:

• 10. Ceramic Products

The information and technical data in this «Product Guide» are indicative and are subject to change without notice. Are based on ourexperience and knowledge and customary uses and applications of the product. The specified values may suffer some variationsdepending on: conditions of entry into work, manufacturing tolerances, testing, etc. For this reason, our warranty is limited to thequality delivered.For further expansion or consult our Technical Department.
This information supersedes all previously issued.