Copsafloor 300
Coloured epoxy resin for high quality multi-layer flooring
Documento sin título
Description
COPSAFLOOR 300 is a coloured, 2 to 4 mm thick floor, based on a two-component epoxy resin and selected aggregates. It exhibits an excellent bondage to the support and high mechanical and chemical resistance.
The type of application and the selected aggregates determine the degree of anti-slide and the roughness of the finishes.
Technical Data
- Type: two-component epoxy resin.
- Colour: Grey, red and green. Other u.o.
- Binder density: 1.3 kg/dm3.
- Pot life at 20 ºC: 30 - 40 min.
- Solid in weight: 100%.
- Support temperature:
- Setting time (20 ºC):
- Initial: 7 horas.
- Light traffic: 2 days.
- Complete: 7 days.
- Mechanical strength:
- Compressive str.: 500 - 700 kg/cm2.
- Flexural str.: 200 - 250 kg/cm2.
- Shear rate Rd according CTE: >45 class 3.
- Bond strenght: > 30 kg/cm2 (concrete breaks).
- Layer thickness: 2-4 mm (as layers).
Features
- High mechanical and chemical resistance.
- Non-slip.
- Adaptable thickness.
- Simple and safe application.
- Non-pollutant.
Application procedure
Surface preparation: The application substrate should be highly resistant concrete. It must be totally dry, clean and free from dust, friable material, paints and curing liquids. The superficial texture should be open-poured. Therefore, a previous mechanical preparation of the substrate by abrasive blast cleaning or grinding is recommended. High spots or other existing deteriorations should be previously repaired to achieve a smooth and uniform surface.
Product application: Mix the resin with the hardener homogeneously and spread the first coat (priming) by a metal trowel. Immediately after that, spread the quartz sand aggregate in excess over the surface.
24 hours later, vacuum the treated surface to clean the loose sand and proceed to apply a new coat of COPSAFLOOR 300 (resin, hardener) by a rubber trowel or by a roller.
Tools cleaning: The tools and application equipments are washed with COPSA cleaning solvent, immediately after their use. If the product hardens, it can be removed only mechanically.
Recommended for
- Food, chemical or aeronautic industry.
- Slaughterhouses and dairies.
- Mechanic workshops.
- Goods warehouses.
- Corridors, passages, etc.
- Industrial kitchens.
- Production zones with water flow or aggressive products.
Special precautions
Specific safety and first aid instructions on the container label must be read carefully.
Before hardening the mix can provoke skin irritation. Use rubber gloves and goggles. In case of skin contact, wash thoroughly with water and soap.
Empty packaging must be disposed of according to the local environmental regulations.
Consumption
2 to 4 mm thickness is recommended. The bond yield for these is approximately as follows:
Intermediate coats: 0.6 kg/m2/ mm thickness.
Topcoat: 0.6 - 0.8 kg/m2.
The yield varies according to the required surface and thickness.
Packaging
COPSAFLOOR 300 is supplied in two- component sets of 20 kg, in grey RAL 7001, red RAL 3009 and green RAL 6010. Other colours are supplied upon request.
Storage
The components should be stored in their unopened original packaging, in dry places and protected from the sun, at 15 to 30ºC temperature.
The shelf life of the product is 12 months from the date of production, provided it is well kept.
The sand aggregates should be kept in their original packaging, not exposed to the open air. The time of their use is unlimited.
Activities where this product appears: - 08. Resin Flooring and Paints
The information and technical data in this «Product Guide» are indicative and are subject to change without notice. Are based on ourexperience and knowledge and customary uses and applications of the product. The specified values may suffer some variationsdepending on: conditions of entry into work, manufacturing tolerances, testing, etc. For this reason, our warranty is limited to thequality delivered.For further expansion or consult our Technical Department.
This information supersedes all previously issued.
|
